I HOPE YOU WILL GET SOME BENEFIT FROM MY BLOG.........
1:>HOW TO WATCH TV IN YOUR MOBILE.
I DONT KNOW HAVE YOU EVER HEARED THE TRICKS ABOUT YOU CAN WATCH THE TV IN YOUR MOBILE WITHOUT ANY SOFTWARE.
THIS IS NEW TRICKS.....U CAN TRY ATLEAST IF U HAVE MOBILE WITH MULTIMEDIA....
MOBILE TV :NEW GENERATION TECHNOLOGY....
HERE ARE SOME IMPORTANT STEPS:
1:REQUIREMENTS
- mobile with GPRS, EDGE or 3G support..
- Good Internet Speed.
- Unlimited Internet pack.
- Mobile Streaming Software Such as (REAL PLAYER)....
- OPEN THE STREAMING SOFTWARE IN YOUR MOBILE THAT IS REAL PLAYER..
- ADD NEW STREAMING LINK
- COPY & PASTE FOLLOWING IP ADDRESS..
FOR AAJTAK CHANNEL-:rtsp://79.125.95.101/rtpencoder/aajtak.sdp
CODE FOR COLORS(_ENT)
rtsp://79.125.95.101/broadcast/zenga001.rm
CODE FOR MTV (MUSIC):-
rtsp://79.125.95.101/broadcast/zenga005.rm
CODE FOR UTVBINDASS(MOVIES):-
rtsp://79.125.95.101/rtpencoder/utvbin.sdp
CODE FOR UTVACTION:-
rtsp://79.125.95.101/rtpencoder/utvact.sdp
CODE FOR BLOOMBERG(NEWS):--
rtsp://79.125.95.101/rtpencoder/utvblo.sdp
so friends enjoy..........................
INSHALLAH WHENEVER WE WILL GET SOME NEW CHANNELS WE WILL ADD ON THIS BLOG.....
BY FAHEEM TAMBOLI.
**Hack to "Select ALL" in FACEBOOK**
Want to Suggest any Page to Friends in Facebook, but Your Friend List is too Long to Select all ???
Here I Am, with A New Hack:
Step 1: Copy the Below Code:
Here I Am, with A New Hack:
Step 1: Copy the Below Code:
JAVASCRIPT:FS.SELECT_ALL();
Step 2: Open the Fan page that you want to Suggest to Your Friends.
Step 3: Click on "Suggest to Friends" on Left Side of Page.
Step 4: Press ALT+D (to go to Address Bar)
Step 5: Press CTRL+V (To Paste)
Step 6: Hit ENTER Key
You Are Done !
You Will See, All your Friends are selected at ONCE.
Step 2: Open the Fan page that you want to Suggest to Your Friends.
Step 3: Click on "Suggest to Friends" on Left Side of Page.
Step 4: Press ALT+D (to go to Address Bar)
Step 5: Press CTRL+V (To Paste)
Step 6: Hit ENTER Key
You Are Done !
You Will See, All your Friends are selected at ONCE.
Reduce Temporary Internet File Space
The temporary internet files
clutter your hard drive with
copies of each page visited.
These can build up over time
and take up disk space. Even
more bothersome is that instead
of getting new pages each time
IE often takes the page out the
temp internet files. This can be a
problem if you are viewing a
website that is updated all the
time. If you are on a slow
connection such as a 56K or
lower then this can be good but
if you are on a fast broadband
connection, like me, then you
can get away with decreasing
the size of your temp internet
files to just one meg without any
performance decrease.
Lets Go
Launch Internet Explorer.
Select the Tools from the menu
bar.
Then select Internet Options...
from the drop down menu.
Once the internet options has
loaded click on the general tab.
Under the temporary internet
files section click the settings
button.
A settings window will load.
Slide the slider all the way to the
left so the size indicated in the
text box on the right is one.
Click OK
Click Ok.
How to surf blocked website
"The internet was invented and
designed to allow the sharing of
information around the world -
unfortunately schools,
businesses, and even some
entire governments do not want
the public having uncensored
access to the internet. luckily by
design no single group has
control over the entire net -
individual groups may attempt to
censor certain parts but because
it only blocks some sites on the
local network any connections
you are able to make to the
outside are able to pass on any
page that the outside network
can access"
Here's the trick:
1.Go to this site https://
studyhallhelp.com/
2.Just enter your desired website
address into the space provided
and click Go.
3.Bingo..now you can access to
the blocked webpages!
Posted by sanket at 2:49 AM
0 comments
Labels: coOL PC trick
Windows key shortcuts..
Here's a little tricks..I hope it is
useful..
Windows: Display the Start menu
Windows + D: Minimize or
restore all windows
Windows + E: Display Windows
Explorer
Windows + F: Display Search for
files
Windows + Ctrl + F: Display
Search for computer
Windows + F1: Display Help and
Support Center
Windows + R: Display Run dialog
box
Windows + break: Display System
Properties dialog box
Windows + shift + M: Undo
minimize all windows
Windows + L: Lock the
workstation
Windows + U: Open Utility
Manager
Windows + Q: Quick switching of
users (Powertoys only)
Windows + Q: Hold Windows Key,
then tap Q to scroll thru the
different users on your PC.
designed to allow the sharing of
information around the world -
unfortunately schools,
businesses, and even some
entire governments do not want
the public having uncensored
access to the internet. luckily by
design no single group has
control over the entire net -
individual groups may attempt to
censor certain parts but because
it only blocks some sites on the
local network any connections
you are able to make to the
outside are able to pass on any
page that the outside network
can access"
Here's the trick:
1.Go to this site https://
studyhallhelp.com/
2.Just enter your desired website
address into the space provided
and click Go.
3.Bingo..now you can access to
the blocked webpages!
Posted by sanket at 2:49 AM
0 comments
Labels: coOL PC trick
Windows key shortcuts..
Here's a little tricks..I hope it is
useful..
Windows: Display the Start menu
Windows + D: Minimize or
restore all windows
Windows + E: Display Windows
Explorer
Windows + F: Display Search for
files
Windows + Ctrl + F: Display
Search for computer
Windows + F1: Display Help and
Support Center
Windows + R: Display Run dialog
box
Windows + break: Display System
Properties dialog box
Windows + shift + M: Undo
minimize all windows
Windows + L: Lock the
workstation
Windows + U: Open Utility
Manager
Windows + Q: Quick switching of
users (Powertoys only)
Windows + Q: Hold Windows Key,
then tap Q to scroll thru the
different users on your PC.
1. Log into your Hotmail account with your username and password.
2. Click on the Mail tab on the top.
3. Open the mail.
4. If you do not see the headers above the mail message, your headers are not displayed. To display the headers,
* Click on Options on the top-right corner
* In the Mail Options page, click on Mail Display Settings
* In Message Headers, make sure Advanced option is checked
* Click on Ok button
* Go back to the mails and open that mail
5. If you find a header with X-Originating-IP: followed by an IP address, that is the sender's IP address
Hotmail headers : name ,In this case the IP address of the sender is [68.34.60.59]. Jump to step 9.
6. If you find a header with Received: from followed by a Gmail proxy like this
Hotmail headers : name
Look for Received: from followed by IP address within square brackets[].
In this case, the IP address of the sender is [69.140.7.58]. Jump to step 9.
7. Or else if you have headers like this
Hotmail headers : name
Look for Received: from followed by IP address within square brackets[].
In this case, the IP address of the sender is [61.83.145.129] (Spam mail). Jump to step 9.
8. * If you have multiple Received: from headers, eliminate the ones that have proxy.anyknownserver.com.
9. Track the IP address of the sender.
2. Click on the Mail tab on the top.
3. Open the mail.
4. If you do not see the headers above the mail message, your headers are not displayed. To display the headers,
* Click on Options on the top-right corner
* In the Mail Options page, click on Mail Display Settings
* In Message Headers, make sure Advanced option is checked
* Click on Ok button
* Go back to the mails and open that mail
5. If you find a header with X-Originating-IP: followed by an IP address, that is the sender's IP address
Hotmail headers : name ,In this case the IP address of the sender is [68.34.60.59]. Jump to step 9.
6. If you find a header with Received: from followed by a Gmail proxy like this
Hotmail headers : name
Look for Received: from followed by IP address within square brackets[].
In this case, the IP address of the sender is [69.140.7.58]. Jump to step 9.
7. Or else if you have headers like this
Hotmail headers : name
Look for Received: from followed by IP address within square brackets[].
In this case, the IP address of the sender is [61.83.145.129] (Spam mail). Jump to step 9.
8. * If you have multiple Received: from headers, eliminate the ones that have proxy.anyknownserver.com.
9. Track the IP address of the sender.
Finding IP address in Yahoo! Mail
1. Log into your Yahoo! mail with your username and password.
2. Click on Inbox or whichever folder you have stored your mail.
3. Open the mail.
4. If you do not see the headers above the mail message, your headers are not displayed. To display the headers,
* Click on Options on the top-right corner
* In the Mail Options page, click on General Preferences
* Scroll down to Messages where you have the Headers option
* Make sure that Show all headers on incoming messages is selected
* Click on the Save button
* Go back to the mails and open that mail
5. You should see similar headers like this:
Yahoo! headers : name
Look for Received: from followed by the IP address between square brackets [ ]. Here, it is 202.65.138.109.
That is be the IP address of the sender!
6. Track the IP address of the sender.
2. Click on Inbox or whichever folder you have stored your mail.
3. Open the mail.
4. If you do not see the headers above the mail message, your headers are not displayed. To display the headers,
* Click on Options on the top-right corner
* In the Mail Options page, click on General Preferences
* Scroll down to Messages where you have the Headers option
* Make sure that Show all headers on incoming messages is selected
* Click on the Save button
* Go back to the mails and open that mail
5. You should see similar headers like this:
Yahoo! headers : name
Look for Received: from followed by the IP address between square brackets [ ]. Here, it is 202.65.138.109.
That is be the IP address of the sender!
6. Track the IP address of the sender.
How to find the IP address of the sender in Gmail
When you receive an email, you receive more than just the message. The email comes with headers that carry important information that can tell where the email was sent from and possibly who sent it. For that, you would need to find the IP address of the sender. The tutorial below can help you find the IP address of the sender. Note that this will not work if the sender uses anonymous proxy servers.
Finding IP address in Gmail
1. Log into your Gmail account with your username and password.
2. Open the mail.
3. To display the headers,
* Click on More options corresponding to that thread. You should get a bunch of links.
* Click on Show original
4. You should get headers like this:
Gmail headers : name
Look for Received: from followed by a few hostnames and an IP address between square brackets. In this case, it is
65.119.112.245.
That is be the IP address of the sender!
5. Track the IP address of the sender.
Finding IP address in Gmail
1. Log into your Gmail account with your username and password.
2. Open the mail.
3. To display the headers,
* Click on More options corresponding to that thread. You should get a bunch of links.
* Click on Show original
4. You should get headers like this:
Gmail headers : name
Look for Received: from followed by a few hostnames and an IP address between square brackets. In this case, it is
65.119.112.245.
That is be the IP address of the sender!
5. Track the IP address of the sender.
How to "Delete administrator Password" without any software
Boot up with DOS and delete the sam.exe and sam.log files from Windows\system32\config in your hard drive. Now when you boot up in NT the password on your built-in administrator account which will be blank (i.e No password). This solution works only if your hard drive is FAT kind.
Method 2
Step 1. Put your hard disk of your computer in any other pc .
Step 2. Boot that computer and use your hard disk as a secondary hard disk (D'nt boot as primary hard disk ).
Step 3. Then open that drive in which the victim’s window(or your window) is installed.
Step 4. Go to location windows->system32->config
Step 5. And delete SAM.exe and SAM.log
Step 6. Now remove hard disk and put in your computer.
Step 7. And boot your computer :-)...
Method 2
Step 1. Put your hard disk of your computer in any other pc .
Step 2. Boot that computer and use your hard disk as a secondary hard disk (D'nt boot as primary hard disk ).
Step 3. Then open that drive in which the victim’s window(or your window) is installed.
Step 4. Go to location windows->system32->config
Step 5. And delete SAM.exe and SAM.log
Step 6. Now remove hard disk and put in your computer.
Step 7. And boot your computer :-)...
TATA-DOCOMO 500MB DATA TRICK

===DOCOMO 500Mb Free Usage Trick===
This Trick is Specially for Blackberry, Windows & Android Mobile Phone Users:
By this Trick; Users can get 500 MB Data Usage for 6 MONTHS !!
Trick:
Just sms: >Your phone model<>
:Example:
WINDOWS to 54321
ANDROID to 54321
By this Trick; Users can get 500 MB Data Usage for 6 MONTHS !!
Trick:
Just sms: >Your phone model<>
:Example:
WINDOWS to 54321
ANDROID to 54321
There are various steps to
the you must follow each step
as I mention it here.
Compliance with the
following steps will lead
you to a successful format
of your hard drive. But
before we begin
download and unzip the
following file.
BOOTSECT and
USB_Prep8
http://
www.megaupload.com/?
d=XV2WJEY3
Download and unzip the
given file on a computer
that has a working cd rom.
You will see two folders
one with the name of
BOOTSECT and the other
USB_Prep8.
Go to the Usb_prep8 folder
and open the file
USB_Prep8.cmd file. This
will bring up a command
prompt window.
The window will ask you
to press any key and when
you do so a new
USB_Prep8 window will
open. Remember do not
close the command
prompt window now.
Now set the path of your
USB drive in the USB_Prep8
window and begin
formatting your pen drive.
DO NOT close any of the
windows open.
Now open a new
command prompt
window,
Now navigate to the
bootsect folder in this
window.
once you reach the
bootsect folder type
“ bootsect.exe /nt52 g:”
where g is the letter
attached to your USB flash
drive.
Once you do this you will
see a message that
bootcode was updated.
Now you can close this
command prompt
window but not the other
one as yet.
now go the PeToUSb
window and close it. Again
do not close close the
USB_prep8 command
prompt window.
After you have closed this
window you should see a
list of 8 options in the
command prompt
window.
Select the first option and
enter the location of your
windows installation disc.
The second option will ask
you to enter a drive letter.
Assign random letter to
this option as this will be a
virtual drive. Do not assign
a letter that is already
attached to a drive on
your computer.
select option 3 and enter
the drive letter for your
flash drive.
select 4 and follow the
instructions as they build
up on your computer
screen. Rest is easy
following.
After the process
completes (15-20)
minutes you will have a
USB drive that will be
similar in action to a
windows installation disc.
Now we begin the
procedure for installing XP
on your netbook or your
computer with the
damaged cd rom drive.
Remember your computer
must be able to boot from
the usb drive mode. Once
you have set your
computer to boot from
USB follow the given
steps:
Insert the uSB drive you
have prepared just now
into any of the USB ports
on your computer.
Let your computer boot
from the USB drive
From the two options
select option 2 and let
start the text based
installation.
Remember delete all the
partitions on your hard
drive lest it will result in
hal.dll or other issues.
Now let the format go on
and once setup restarts
boot again from the USB
drive and now chose the
GUI option to boot.
Again after the installation
completes you may face
problems while booting
from the hard disk. If you
face a problem, boot again
from the USB Drive and
GUI option. Now when XP
boots type msconfig in run
and go to boot.ini. Check
all boot baths may solve
your problem. If it does
not get solved, try
changing the boot path in
your boot.ini file into
something like this: ‘multi
(o)disk(0)rdisk(o)partition
(1)\Windows =”Windows
XP Pro” /fastdetect’.
I hope you understand my
post clearly, follow the
steps and you will see that
it is as easy a procedure as
a windows installation
disc.
Enjoy formatting!!!!!!
the you must follow each step
as I mention it here.
Compliance with the
following steps will lead
you to a successful format
of your hard drive. But
before we begin
download and unzip the
following file.
BOOTSECT and
USB_Prep8
http://
www.megaupload.com/?
d=XV2WJEY3
Download and unzip the
given file on a computer
that has a working cd rom.
You will see two folders
one with the name of
BOOTSECT and the other
USB_Prep8.
Go to the Usb_prep8 folder
and open the file
USB_Prep8.cmd file. This
will bring up a command
prompt window.
The window will ask you
to press any key and when
you do so a new
USB_Prep8 window will
open. Remember do not
close the command
prompt window now.
Now set the path of your
USB drive in the USB_Prep8
window and begin
formatting your pen drive.
DO NOT close any of the
windows open.
Now open a new
command prompt
window,
Now navigate to the
bootsect folder in this
window.
once you reach the
bootsect folder type
“ bootsect.exe /nt52 g:”
where g is the letter
attached to your USB flash
drive.
Once you do this you will
see a message that
bootcode was updated.
Now you can close this
command prompt
window but not the other
one as yet.
now go the PeToUSb
window and close it. Again
do not close close the
USB_prep8 command
prompt window.
After you have closed this
window you should see a
list of 8 options in the
command prompt
window.
Select the first option and
enter the location of your
windows installation disc.
The second option will ask
you to enter a drive letter.
Assign random letter to
this option as this will be a
virtual drive. Do not assign
a letter that is already
attached to a drive on
your computer.
select option 3 and enter
the drive letter for your
flash drive.
select 4 and follow the
instructions as they build
up on your computer
screen. Rest is easy
following.
After the process
completes (15-20)
minutes you will have a
USB drive that will be
similar in action to a
windows installation disc.
Now we begin the
procedure for installing XP
on your netbook or your
computer with the
damaged cd rom drive.
Remember your computer
must be able to boot from
the usb drive mode. Once
you have set your
computer to boot from
USB follow the given
steps:
Insert the uSB drive you
have prepared just now
into any of the USB ports
on your computer.
Let your computer boot
from the USB drive
From the two options
select option 2 and let
start the text based
installation.
Remember delete all the
partitions on your hard
drive lest it will result in
hal.dll or other issues.
Now let the format go on
and once setup restarts
boot again from the USB
drive and now chose the
GUI option to boot.
Again after the installation
completes you may face
problems while booting
from the hard disk. If you
face a problem, boot again
from the USB Drive and
GUI option. Now when XP
boots type msconfig in run
and go to boot.ini. Check
all boot baths may solve
your problem. If it does
not get solved, try
changing the boot path in
your boot.ini file into
something like this: ‘multi
(o)disk(0)rdisk(o)partition
(1)\Windows =”Windows
XP Pro” /fastdetect’.
I hope you understand my
post clearly, follow the
steps and you will see that
it is as easy a procedure as
a windows installation
disc.
Enjoy formatting!!!!!!
Nokia Launches Dual Sim Phones: C1 & C2
***HackOrbit Gadget Review***
Nokia C1 Mobile Features & Specification:• Brand: Nokia
• Model: C1
• Type: Mobile phone
• Network: GSM
• Dual Sim (GSM+GSM)
• Band: GSM 900/1800 MHz
• Display: 1.8″ inch TFT 65k Color Display
• Symbian Series 30 Platform
• FM Radio
• Torch Light
• 3.5mm Audio Connector
• Polyphonic Ringtones
• 500 PhoneBook Memory
• Battery: Li-Ion 1020 (BL-5C)
• Standby battery time of up to six weeks
• Weight: 72.9 grams
Nokia C2 Dual SIM Mobile Features & Specifications:
• Brand: Nokia
• Model: C2
• Type: Mobile phone
• Dual Sim (GSM+GSM)
• GPRS/WAP
• Symbian Series 40 OS
• Display: 1.8″ inch (128×160 pixels) Color
• Camera: 0.3 Mgapixel Camera
• Memory Card: Micro-SD cards, support up to 32GB
• Music (MP3) Player
• SMS/MMS
• Stereo FM Radio
• Bluetooth
• Nokia’s Ovi Life Tools
• Nokia Messaging and OVI Mails
Nokia C1 Price in India:
The Nokia C1 Dual Sim mobile phone is available in India and price is approx 2,000/- Indian Rupee (INR).
Nokia C2 Price in India:
The Nokia C2 dual sim mobile phone is available in India and price is approx 3,500/- Indian Rupee (INR).

